Required Concrete Volume
0 m³
Including wastage allowance
Calculate Ready Mix Concrete for North Wales Projects
Accurate Volume & Cost Estimates for Wrexham & Surrounding Areas
Planning a concrete project in Wrexham, North Wales? Our Wrexham concrete calculator helps you accurately estimate the volume of ready-mix concrete needed for driveways, patios, foundations, and extensions across Wrexham, Chester, Deeside, Mold, and Buckley. Calculate concrete quantities instantly and get cost estimates based on 2026 Wrexham concrete suppliers pricing.
Wrexham benefits from multiple ready-mix concrete suppliers including TG Concrete, Heidelberg Materials, and local providers offering competitive rates. Our calculator uses current North Wales concrete prices ranging from £95-125/m³ depending on concrete grade, delivery distance, and project specifications compliant with Wrexham Building Control regulations.
Calculate volume, weight, and estimated costs for your project
Concrete prices in Wrexham and North Wales are influenced by grade specification, delivery distance, and supplier availability. Our Wrexham concrete calculator uses current market rates from local suppliers operating throughout Wrexham Industrial Estate, Chester, Deeside, and surrounding North Wales areas.
| Concrete Grade | Application | Price per m³ | Typical Use |
|---|---|---|---|
| C15 / GEN1 | Blinding / Light duty | £95-105 | Oversite blinding, light domestic paths |
| C20/25 / GEN2 | Domestic minimum | £102-112 | Garage floors, light traffic areas, shed bases |
| C25/30 / GEN3 | Standard structural | £110-120 | Driveways, patios, house floors, foundations |
| C30/37 / RC30 | Heavy duty residential | £118-128 | Commercial drives, reinforced bases, retaining walls |
| C35/45 / RC35 | Commercial grade | £128-140 | Industrial floors, agricultural yards, heavy machinery |
| C40/50 / RC40 | High strength | £138-155 | Structural beams, specialist applications, marine |
| Fibre Reinforced | Enhanced strength | £125-145 | Reduces cracking, industrial floors, parking areas |
| Self-Leveling | Floor screeds | £145-165 | Internal floor leveling, rapid pour applications |
Wrexham and North Wales are served by multiple ready-mix concrete suppliers with plants strategically located for efficient delivery to Wrexham, Chester, Mold, Deeside, and Buckley. Use our Wrexham concrete calculator then contact these trusted suppliers for quotations.
Location: Wrexham Industrial Estate, LL13 9PS
Delivery Radius: 15 miles from Wrexham
Grades Available: Full range C15-C40, fibre-reinforced
Minimum Order: 0.5m³ (half cubic meter)
Price Range: £110-125/m³ for C25/30
Contact: Major national supplier with local expertise
Location: Part of Tudor Griffiths Group network
Delivery Radius: Wrexham, Shropshire, Cheshire, North Wales
Grades Available: All standard grades plus specialist mixes
Minimum Order: 1m³ typical
Price Range: £105-120/m³ competitive local pricing
Contact: Family-owned with 14 plants across region
Location: John Ellis & Sons - Local independent
Delivery Radius: Wrexham, Chester, Deeside, Mold, Buckley
Grades Available: Mixed on-site to specification
Minimum Order: 0.5m³ - ideal for small jobs
Price Range: £100-115/m³ excellent for DIY projects
Contact: Next-day delivery, pay only for what you use
Location: Serving Wrexham and surrounding areas
Delivery Radius: North Wales specialist coverage
Grades Available: General and design ready-mix, screed
Minimum Order: Small load specialists
Price Range: £105-118/m³ with local knowledge
Contact: Over 25 years experience in North Wales
Location: Regional coverage via Chester plant
Delivery Radius: Wrexham area from nearby depots
Grades Available: Full specification range
Minimum Order: Varies by location
Price Range: £112-128/m³ national pricing
Contact: Major UK supplier with quality assurance
Location: Coverage from Cheshire/North Wales network
Delivery Radius: Wrexham and 20-mile radius
Grades Available: All BS EN standards plus specialist
Minimum Order: 1m³ standard
Price Range: £110-125/m³ competitive rates
Contact: Reliable supply with technical support
Selecting the correct concrete grade ensures structural integrity and compliance with UK Building Regulations. Our Wrexham concrete calculator helps determine volume requirements, but choosing the appropriate grade is crucial for project success and Wrexham Building Control approval.
✓ Quick Grade Selection Guide:
Wrexham County Borough Council enforces UK Building Regulations for all construction projects. Concrete work typically requires Building Control notification or approval depending on project scope.
Our calculator provides accurate volume estimates for rectangular, circular, and triangular concrete pours. Follow these steps for best results when planning your Wrexham construction project.
Accurate measurements: Use a measuring tape for length and width in meters
Depth specification: Typical depths - paths 75-100mm, driveways 100-150mm, foundations 150-225mm
Account for slopes: Measure at multiple points for uneven ground
Allow for formwork: Internal dimensions of your shuttering/formwork
Foundation: Load-bearing base for buildings (150-225mm deep)
Driveway: Vehicle access requiring 100-150mm depth minimum
Patio: Pedestrian area typically 75-100mm thickness
Floor slab: Internal or garage floors 100-150mm standard
Domestic driveways: C25/30 recommended minimum
Foundations: C25/30 or C30/37 based on structural design
Paths and patios: C20/25 acceptable, C25/30 for durability
Heavy-duty: C30/37 or C35/45 for commercial/agricultural
5% wastage: Simple rectangular pours with straight edges
10% wastage: Standard allowance for most projects
15% wastage: Complex shapes, irregular areas, stepped pours
20% wastage: Very irregular shapes or inexperienced pourers
Volume in m³: Order this amount from your supplier
Weight in tonnes: Ensure vehicle access can support concrete truck (26-32 tonnes loaded)
Cost estimate: Budget guideline including delivery and VAT
Number of loads: Standard truck carries 6-8m³ maximum
Get quotes: Contact 2-3 suppliers for competitive pricing
Book delivery: Specify grade, volume, and delivery time
Confirm access: Ensure concrete truck can reach pour location
Prepare site: Have formwork, reinforcement, and labor ready
Concrete delivery costs vary based on distance from the supplier plant and order volume. Most Wrexham suppliers operate from Wrexham Industrial Estate with delivery coverage extending to Chester, Deeside, Mold, Buckley, and surrounding North Wales communities.
Typical Wrexham Delivery Charges 2026:
Beyond concrete volume, successful projects require proper preparation materials. Our Wrexham concrete calculator estimates additional materials needed for professional results compliant with building standards.
A properly compacted sub-base prevents settlement and cracking. Type 1 MOT (Ministry of Transport) stone is the standard sub-base material for driveways, patios, and floor slabs throughout Wrexham and North Wales.
Essential moisture barrier for ground-bearing floor slabs and some external applications. Use 1200 gauge (0.3mm) minimum thickness for compliance with Building Regulations.
⚠ DPM Installation Best Practices:
Steel reinforcement mesh (A142, A193, or A252) prevents cracking and adds tensile strength. Recommended for driveways, garage floors, and suspended slabs.
North Wales weather requires careful planning for concrete pours. Temperature and rainfall significantly affect concrete curing and final strength.
Ideal range: 10-20°C for optimal curing
Cold weather (under 5°C): Use rapid-hardening cement, cover with insulating blankets, avoid pouring if freezing expected within 48 hours
Hot weather (over 25°C): Pour early morning, keep concrete cool, increase water replacement during finishing, cure with wet hessian
Frost protection: Essential November-March in Wrexham area
Before pouring: Check 48-hour weather forecast, avoid pouring if heavy rain expected
During pour: Light drizzle acceptable, stop work if moderate/heavy rain starts
After pouring: Cover with polythene sheets if rain within 6 hours of finishing
North Wales climate: Plan for high rainfall probability, have covers ready
Minimum period: 7 days for adequate strength development
Keep moist: Spray with water or cover with wet hessian/polythene
Prevent drying: Especially critical first 3 days
Load bearing: Wait minimum 7 days before light traffic, 14-28 days for heavy vehicles
Truck dimensions: 3m wide, 9-11m long, 3.5m high typical ready-mix truck
Weight: 26-32 tonnes loaded - check ground conditions and overhead clearance
Reach: Standard chutes extend 3-4m from truck position
Alternatives: Concrete pump hire £200-400 for difficult access (add £5-8 per m³ to cost)
Concrete prices in Wrexham range from £95-155 per cubic meter depending on grade. Standard C25/30 concrete (most common for driveways and foundations) costs £110-120/m³. This includes material only - add £45-85 delivery charge depending on distance from supplier. C20/25 for lighter applications costs £102-112/m³, while heavy-duty C30/37 runs £118-128/m³. Total project cost includes VAT at 20%, delivery charges, and optional extras like fibre reinforcement or self-leveling additives.
C25/30 (also called GEN3) is the recommended minimum grade for domestic driveways in Wrexham and throughout North Wales. This provides adequate strength for car traffic with 100-150mm thickness. For commercial driveways or heavy vehicle access, upgrade to C30/37 (RC30) with 150mm minimum depth and consider steel mesh reinforcement (A142 or A193). Lighter grades like C20/25 are not recommended for driveways as they lack durability for vehicle loading and Welsh weather conditions.
Calculate concrete volume using: Length (m) × Width (m) × Depth (m) = Volume (m³). Example: A driveway 5m long, 3m wide, 150mm (0.15m) deep requires 5 × 3 × 0.15 = 2.25m³. Always add 10% wastage allowance, making it 2.48m³ to order. For circular areas use: π × radius² × depth. Our Wrexham concrete calculator does this automatically and converts millimeters to meters. Round up to nearest 0.25m³ when ordering as suppliers may have minimum increments.
Minimum orders vary by Wrexham supplier. John Ellis & Sons (Ready Mixed Wrexham) offers minimums from 0.5m³ (half cubic meter) ideal for small DIY projects. Heidelberg Materials Wrexham also accommodates 0.5m³ minimum orders. Larger suppliers like TG Concrete typically require 1m³ minimum. Small load surcharges of £15-25 may apply for orders under 3m³. For very small amounts (under 0.5m³), consider bagged concrete from builders merchants, though this costs significantly more per m³ (£200-300/m³ equivalent).
Building Control notification is required for structural concrete including house foundations, extensions, and load-bearing elements. Contact Wrexham County Borough Council Building Control (bc_admin@wrexham.gov.uk) before starting work. Driveways, patios, and garden structures typically don't require Building Control but may need planning permission if altering access or within conservation areas. Foundation work requires approved structural calculations and inspections at key stages (excavation, reinforcement, concrete pour). Allow 48 hours minimum notice before starting notifiable work.
Domestic driveways in Wrexham should be minimum 100mm thick for light vehicles, with 150mm recommended for durability and Welsh weather resistance. Use C25/30 concrete over 150-200mm compacted Type 1 MOT sub-base. For commercial driveways or heavy vehicles (vans, trucks), increase to 150-175mm concrete thickness with C30/37 grade and A142 steel mesh reinforcement. Ensure proper sub-base preparation - this is more critical than concrete thickness for preventing settlement and cracking.
Standard ready-mix trucks are approximately 3m wide, 9-11m long, and weigh 26-32 tonnes when loaded. Check access route for width restrictions, overhead clearance (3.5m minimum), and ground conditions to support weight. Trucks can typically reverse 20-30m safely. Chutes extend 3-4m from truck position. For difficult access in narrow Wrexham streets or rural properties, consider concrete pump hire (£200-400 plus £5-8/m³ pumping charge) which uses smaller vehicles and flexible pipework reaching 20-30m from pump position.
GEN grades (GEN1, GEN2, GEN3) are designed concrete mixes for general use without reinforcement. GEN3 (equivalent to C25/30) is standard for driveways and foundations. RC grades (RC30, RC35, RC40) are designed for reinforced concrete applications with steel reinforcement bars or mesh. RC30 (C30/37) is used for structural elements like beams, suspended slabs, and retaining walls. For most Wrexham domestic projects, GEN3/C25/30 is appropriate. Upgrade to RC30/C30/37 if your project involves structural design or heavy-duty use.